ENVIRO Carpet WIz - 5L

CARPET PRESPRAY & SPOT REMOVER

(Not hazardous according to criteria of Worksafe Australia)

CARPET WIZ is a revolutionary new product because of it’s fast acting formula. You can clean your carpets faster and remove stains at the same time, which makes your job easier by saving time and money. There is no need to add solution to the injectors or solution tank after using CARPET WIZ as a pre-spray, just rinse & extract with warm/hot water. CARPET WIZ can be used with all types of carpet cleaning equipment and will give great results. CARPET WIZ is designed to meet Australian standards on pH. When used as recommended to the specifications from the manufacturer this formula will clean and remove stains from the Fibres gently without leaving a high pH like some others. Because of its mild pH. formula it is safe to use CARPET WIZ on in-situ dyed carpets, printed carpets and persian rugs. CARPET WIZ is a non acid product which makes it safe to work around fiberglass or aluminum painted surfaces. CARPET WIZ is also a brilliant hand spotter, spot & stain remover.

CARPET WIZ has a very strong and pleasant Lavender aroma. After doing a job not only can you see but smell it which makes all the difference.

How To Use !

To clean very dirty carpets like nylon or old acrylic at pubs or hotels, use hot water in pre-spray pump then pre-spray the carpet before setting up your hoses. This gives time for CARPET WIZ to work on the dirt and soil that has attached to the fibre.

For new generation fibres, CARPET WIZ can be used with very hot water because of its low pH level. If you are using a truckmount set temperature to 90ºC. If you run into problems and your pre-spray dries you don’t have to worry or pre-spray again. Just extract.

DILUTIONS –

Light Jobs – Dilute CARPET WIZ 1 to 40 parts water.

Medium Jobs – Dilute CARPET WIZ 1 to 30 parts water.

Heavy Jobs – Dilute CARPET WIZ 1 to 20 parts water.

Spot Cleaning – Dilute CARPET WIZ 1 to 2 – 1 to 5 parts water.